S3239936 Patch - PROJECT 2
From Physical Programming
To operate this Patch use the following interface.
Create the GEM window (make sure you click the fullscreen toggle)
On the key board use:
C to create the cube.
tab to toggle cube on and off.
Left and Right arrow keys to translate in the X axis. Up and Down arrow keys to translate in the Y axis.
Q and W to rotate about the X axis. A and S to rotate about the Y axis. Z and X to rotate about the Z axis.
R and T to change the Red spectrum. G and H to change the Green spectrum. B and N to change the Blue spectrum.
- and + to increase and decrease size.
1 to create a line cube. 2 to create a solid cube. 3 to create a dot cube.
esc to destroy the window.
